Stainless steel seamless elbows are mainly used in piping systems, where they are used at pipe bends. Stainless steel seamless elbow has excellent corrosion resistance, can resist corrosion, pitting, rust and wear, etc., and its material strength is very high.
The production standards for stainless steel seamless elbows are as follows:
1. Most of the stainless steel seamless elbows are used for welding, so in order to improve the welding quality of the pipe fittings, the ends are all turned into bevels, with a certain angle and a certain side. This requirement is relatively strict, the thickness of the side, the angle The size and deviation range are stipulated, and the surface quality and mechanical properties of the pipe fittings are basically the same as the pipes.
2. Requirements for packaging of stainless steel seamless elbows: if it is a small pipe fitting such as an export, it should be made into a wooden box of about 1m³. The number of elbows in this wooden box should not exceed 1 ton, and the package should be allowed by the standard, that is Large sets are small, but the total weight generally cannot exceed 1 ton; if it is a large piece, it should be packaged individually, such as 24″ must be packaged individually, and the packaging should be marked, indicating the size, batch number, steel number and manufacturer’s trademark.